Editor is Too Slow When Using Many Elements – How to Improve Performance?

feyifireamen · 2025-04-10T04:40:08.238Z

reusable it is

ihsanzainal84 · 2025-04-10T04:50:45.154Z

Not sure about how native element data sources work now (haven’t really noticed a difference myself), but Keith wrote ListShifter to not load the actual data source until you run any of the ListShifter’s actions and events involving that data source.

boston85719 · 2025-04-10T05:34:07.253Z

ihsanzainal84:

ListShifter to not load the actual data source until you run any of the ListShifter’s actions and events involving that data source

It has always been the case that the ‘list to shift’ exposed state is populated with the value from the list shifter element data source regardless of if an element is visible or not

Screen Shot 2025-04-10 at 12.28.17 PM342×498 32.8 KB

But, I could be mistaken and over the past 5 or so years it has not actually been doing that…in my experience these values below would have been available as the ‘list to shift’ exposed state if the element was visible or not

Screen Shot 2025-04-10 at 12.29.56 PM1901×305 59 KB

Screen Shot 2025-04-10 at 12.29.18 PM348×131 7.38 KB

Screen Shot 2025-04-10 at 12.29.11 PM330×177 6.74 KB

I think perhaps, what might be happening is the plugin element is not getting initialized because it is not visible and so because it is not initialized the exposed state value of ‘list to shift’ is no longer available despite the fact the ‘list to shift’(ie: datasource) is available as seen in the debugger.

The reason I believe this is a change is that a previously working function that relied on the exposed state of ‘list to shift’ to have the values available no longer functions and I needed to rebuild it just now.

mitchbaylis · 2025-04-10T05:39:47.914Z

I tested it just before posting using the console to ensure it was still the way bubble handles it and it is

not sure about listshifter as I stopped using it once I figured out the workarounds with native bubble

boston85719 · 2025-04-10T05:47:54.586Z

mitchbaylis:

I tested it just before posting using the console to ensure it was still the way bubble handles it and it is

boston85719:

but repeating groups are still exposing their list value even when not visible. I think it is a bug or maybe incompatability of a no longer maintained plugin.

yes, from my testing that is true

ihsanzainal84 · 2025-04-10T06:49:35.979Z

Once you access the value using the debugger the data gets loaded. @keith had a post in regards to when ListShifter loads a value.

Also when you write a plugin you can pretty much predict when the data first loads. I say predict and not define because of how other native factors can force data to load.

randomanon · 2025-04-10T11:00:35.221Z

This is starting to remind me of the “microservices vs. monolith” debate.

boston85719:

Don’t…reusables should for the most part only ever be a group, and the reason being is flexibility…you can not put a reusable element that is a popup

I mean functionally.

code-escapee:

@randomanon I’ve noticed that I prefer a hybrid approach, where I use a container to hold the reusable element. I think I do so because I find it easier to display the reusable thru the container as well as set properties and initialize the reusable. I’m not sure if it’s actually best to do this but I wonder on your thoughts on this kind of setup?

The nice thing about that is that you can link the property to the container’s data type and have a dynamically updated passthrough instead of having to set a custom state.

mitchbaylis:

not sure about listshifter as I stopped using it once I figured out the workarounds with native bubble

Would love to hear more about this.

ed19 · 2025-04-10T11:21:56.223Z

Thanks @boston85719 will bear in mind. Luckily the pages I mentioned were actually groups within a SPA.

Have had about 100 errors per page so far, but they’ve all been easy enough to resolve. That said, I’m certain I will hit some delightful speed bumps somewhere along the line, so am keeping an eye on this thread for tips!

boston85719 · 2025-04-10T11:45:17.428Z

ed19:

I will hit some delightful speed bumps somewhere along the line, so am keeping an eye on this thread for tips!

After first convert action is complete, check with original location in the app editor any custom event triggers or conditional triggers that exist and may be involved with the elements converted into the reusable. Any custom states that need to be rebuilt as they are on elements not part of the conversion, ensure all custom state names are copied and pasted in, do not attempt to just retype them, as this will make it easier for Bubble to remap them for the most part. Before conversion, remove any folders from the workflows as those usually don’t get copied over. Copy and paste with workflows all ‘on page elements’ (like popups, floating groups) that are not part of the original conversion, and then once you’ve done all of that, begin to use the issue checker to just systematically go through each one.

As you move through issues within expressions, you’ll notice bubble often leaves a lot of information there to understand easily how to remap it, as that helps to cut down time referencing the original location within the app editor.

Those are majority of issues that will crop up.

ed19 · 2025-04-10T12:38:23.090Z

Yep already done most of this! I’ve done a fair bit of work moving pages around so am relatively well informed with regards to remapping functions. The main complication I’m having is page-level states or workflows needing to be shifted across, hopefully the end justifies the means.

emir.ozgun · 2025-04-10T12:44:35.121Z

boston85719:

Sorry mate, but using reusables for an SPA as the ‘pages/views’ is ESSENTIAL

No it is not, best practice is to have maximum flexibility with minimum overhead, who put the idea of reusables as pages idea but it is straight out wrong.

boston85719:

Don’t…reusables should for the most part only ever be a group, and the reason being is flexibility

It can be very well used as a popup, who says these things ?. I believe there is a place the same place that daisy chain filtering idea came up.

Think about it, idea of page as reusables was there when a reusable has had only 1 property

georgecollier · 2025-04-10T12:55:47.497Z

boston85719:

Also, option displays should be lowercase to be more compatible with URL.

Option set displays with spaces / regardless of capitlisation work when using Get an option from page URL

emir.ozgun:

best practice is to have maximum flexibility with minimum overhead

emir.ozgun:

reusables as pages idea is straight out wrong

CleanShot 2025-04-10 at 13.55.22@2x961×1310 64.5 KB

emir.ozgun · 2025-04-10T13:11:28.335Z

I have pages as reusables, I have pages that are not reusables but content is all reusables. Just these things are limiters not ideas. Similarly I have popup as a reusable as well as group reusable inside a popup

randomanon · 2025-04-10T13:50:46.706Z

georgecollier:

CleanShot 2025-04-10 at 13.55.22@2x961×1310 64.5 KB

CleanShot 2025-04-10 at 13.55.22@2x961×1310 64.5 KB

I raise you

image603×340 78.8 KB

boston85719 · 2025-04-10T16:30:25.907Z

It is not about modularity for me. I use the reusables as ‘pages/views’ for SPA or pages like a dashboard for the main purpose of limiting editor slow down. I use reusables for modularity when I create features or functions as groups and plan to use them in more than one area of the app, or just prefer the ease of maintenance by the stand alone feature being just a reusable and surrounded by no clutter from other features/element functions.

georgecollier:

Option set displays with spaces / regardless of capitlisation work when using Get an option from page URL

That is true, and I will be lazy in my response and just paste in what AI says when asked (side note, this would be the exact way I personally would have explained it and I do not know if the AI just decided to learn me well enough to produce a response I agree with )

Screen Shot 2025-04-10 at 11.17.02 PM888×805 75.7 KB

emir.ozgun:

No it is not, best practice is to have maximum flexibility with minimum overhead, who put the idea of reusables as pages idea but it is straight out wrong.

I think you misunderstand the concept of reusables as pages. The concept is for an SPA, which is a Single Page Application, that when you change the URL to essentially ‘navigate’ the user, and so need to change the view or page the user sees based on the URL and the expectation of navigating to a new page, that is built out as a reusable element.

In terms of who put the idea of reusables as pages in this way, I can not say for sure who was the first, but you can maybe blame me for it. The main reason for it, and why I tested it myself as a theory to reduce the amount of times my editor crashed some 5 years ago, and when finding out it solved the issue of an editor crashing, I began advising people to use the method in order to avoid editor crashes when building SPAs or pages like dashboards or just large complex pages with functions or features that could be decoupled easily.

emir.ozgun:

It can be very well used as a popup, who says these things ?

I do…the logic stands. There is no reason to create a reusable element that is just a popup if you plan on using it in more than one place. The reason I make this statement is from my years of experience struggling with decisions made earlier in a build when it comes to a later point in the build and there needs to be a change made. It also just allows for more flexibility in how you can use a reusable because if you create a reusable that is a popup or a floating group, then as I explained previously, you can only in the app ever use them as a popup or a floating group. However, if it is reusable as a group, that reusable can be used as every single type of container in the editor, so a Group, Popup, Group Focus, Floating Group, in a Repeating Group…so, I don’t know about you, but the flexibility of how to use it in potentially 5 different container types compared to being locked into just one container type means for me, I would prefer for the most part to just always create a reusable as a group.

emir.ozgun:

I believe there is a place the same place that daisy chain filtering idea came up.

It absolutely is not

emir.ozgun:

I have pages as reusables, I have pages that are not reusables but content is all reusables

Yes of course. This is what we have been speaking about…it is not possible to have a reusable that is a page, so this sounds like you are doing what is advised.

emir.ozgun:

I have popup as a reusable as well as group reusable inside a popup

yes, and my advice is that as I’ve described to have a group reusable inside a popup on the page for the flexibility of how to use it

emir.ozgun · 2025-04-10T16:37:35.310Z

boston85719:

you misunderstand the concept of reusables as pages. The concept is for an SPA

You lost me there

emir.ozgun · 2025-04-10T16:42:48.723Z

I don’t know you are being sincere or not but I perceive this as very disrespectful, as an act of passive agressive thing. Some peple act like 5 years old when they get into an argument, like being in the state of intermittently forgetting things.

code-escapee · 2025-04-10T20:52:41.626Z

boston85719:

georgecollier:

Option set displays with spaces / regardless of capitlisation work when using Get an option from page URL

That is true, and I will be lazy in my response and just paste in what AI says when asked (side note, this would be the exact way I personally would have explained it and I do not know if the AI just decided to learn me well enough to produce a response I agree with )

Screen Shot 2025-04-10 at 11.17.02 PM888×805 75.7 KB

your question wasn’t worded precisely. It’s not just for a regular URL; it’s for a view so all of the reasons not to dont apply for anything after the question mark. No option set name is going to be less readable then the gclid or fbclid…

Using option set names/displays that are descriptive of the view itself and readable at a glance (ie, spaces) are super helpful to be able to quickly look at a view and understand whats going on. I’ve even capitlized ENTIRE words in a view to stress something about the view.

mitchbaylis · 2025-04-11T01:52:43.893Z

Option sets work fine in urls as is.

In cases where they don’t because I wanted to use special characters or something like that I just add a parameter to the option set and then reference that in the url and lookup instead.

boston85719 · 2025-04-11T03:10:56.687Z

code-escapee:

it’s for a view so all of the reasons not to dont apply for anything after the question mark.

That is one way to look at things yes, that in special cases where best practices do not need to be considered, you do not need to follow the guidelines of a best practice.

But strange enough for me, following best practices no matter which scenario I am in allows me to follow those best practices every time I need them as if it is second nature. Being consistent I believe is key doing a job well over and over, so I try to keep the same approach no matter the need. And for me personally, I do not only use option sets in parameters nor do I create my views as only parameters. I use path lists a lot more than parameters now because parameters are no good for SEO. But of course, there are times when I take the lazy approach and use a parameter as the page doesn’t require SEO benefits, but I am not attempting to change how I name option sets and keep track of whether it is used as a parameter or a path list.

code-escapee:

No option set name is going to be less readable then the gclid or fbclid…

nobody is sharing urls with tracking parameters added in…I really don’t understand the point of the comment

code-escapee:

readable at a glance (ie, spaces) are super helpful to be able to quickly look at a view and understand whats going on.

Great point. Yes, for you the developer it is easier for you to read it in the editor (although I find eat-chocolate just as readable as EAT CHOCOLATE), but including a space for something that will be used in a URL is just bad practice since the URL encoded value of a space is equivalent to %20 so the EAT CHOCOLATE now becomes EAT%20CHOCOLATE in the URL which is not at all readable and makes life a lot more difficult for the developer to structure the URL to use in areas that it needs to be shared.

I tried some more precisely worded questions to try and get a different answer

when should I use a space in a word or sentence that will be placed into a url

Screen Shot 2025-04-11 at 9.40.25 AM809×715 61.3 KB

when should I capitalize words or letters from sentences or strings that will be used in the url

Screen Shot 2025-04-11 at 9.42.03 AM806×717 62.5 KB

when should I not use lowercase letters that will be in the url?

Screen Shot 2025-04-11 at 9.45.07 AM814×718 45.9 KB

Screen Shot 2025-04-11 at 9.45.38 AM846×653 44.1 KB

when should I use a space instead of a - for strings in url?

Screen Shot 2025-04-11 at 9.46.43 AM811×704 47.5 KB

Hopefully all of this helps clear up some confusion for other users who may stumble into this post and want to know best practices and things to avoid. I wish when I first got started somebody with 7+ years of experience working with this type of stuff could have laid it out so plainly for me and I didn’t need to spend so much time reading blog posts and articles on the subject plus playing around with different approaches in Bubble leading to issues and headaches. Just some free advice on things to avoid and best practices that are easily implemented, but of course, everybody is welcome to use their own form of ‘best practices’ as they’ve come up with them and they work for them.

mitchbaylis:

Option sets work fine in urls as is.

In cases where they don’t because I wanted to use special characters or something like that I just add a parameter to the option set and then reference that in the url and lookup instead.

all true, but the use of the parameter on the option set that you alter the display value to be more URL friendly, doesn’t help you to make use of the feature of the Get Data from URL that I still believe many many developers out there do not know. I found this out when explaining this to other Bootcamp instructors some 5 years ago and even recently on the forum a trainer with more time on platform than me had not discovered yet. If you want Bubble to know what option you are using without needing to expand your expression you have to use the display value since that is THE ID OF THE OPTION that bubble uses internally.

Here is a video explaining and demonstrating the differences between the best practice and the other approaches. Hopefully this helps some new users understanding how they should set things up from the beginning and knowing why.