How to send dynamic header values with the API

Jici · 2025-03-24T11:45:57.531Z

Could be two thing. A) You are not getting the code from the page url.
From what I see, this may be possible as you try to use open an external website that is probably the authorize url and after in the same workflow, you are trying to fetch the token.

You should remove all step after open an externa website (that is probably returning an error in issue checker anyway because this should be the last step in a workflow) and instead add a workflow on page load (when get code from page url is not empty) and process to the continue step.

harumaki.ono · 2025-03-24T16:09:55.613Z

Thank you.
I feel like I’m almost there.

image914×888 12.4 KB

image1268×1042 27.9 KB

I tried separating the workflows. What do you think?

However, as it is now, the page is loaded on the login page (https://xxxxxxxx.com/login), so it seems that the continue API cannot be called.

Currently, when the Auth0 login is completed, it redirects to the following:
https://xxxxxx.com/api/1.1/oauth_redirect?code=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

image1486×392 19.2 KB

What should I do in this case?

I would appreciate your advice.

Thank you for your continued support.

Jici · 2025-03-24T16:15:22.030Z

You cannot use the generic redirect url if you want to manually manage the auth process. The generic url is only used if you select the Bubble user-agent auth. You are using self-handled. You could try to use a backend WF API endpoint with redirect to a page after or just set a page of your app that will contain the continue part (can be the same page that you have the authorize link (with conditionnal that detect the code in url, you could hide button to authorize page and show a loading icon)

harumaki.ono · 2025-03-25T14:02:09.891Z

Thank you.
I apologize for the late reply.

I understand that a generic redirect URL cannot be used.

I was trying to create an API workflow, but I don’t know how to do it specifically.

This is what I have currently, but does this seem correct?

image914×1412 31.7 KB

（In particular, I have little understanding of the following workflow:）

image722×1032 15.8 KB

What exactly should I do?

I apologize for the trouble, but I would appreciate any advice you could give me.

I look forward to your continued help.

Jici · 2025-03-25T14:45:23.369Z

You don’t need to return data, you need to call your continue endpoint and do what you want with it after.
But it’s easier to just redirect the user to a page of your app with the continue action on page load like I’ve suggested before.

harumaki.ono · 2025-03-25T15:10:11.752Z

Thank you.

I’m back to the page load workflow.

If I go with the latter method, is there something wrong with the relevant part?

image1072×1036 30.9 KB

image1408×1056 29.3 KB

By the way, I think I need to set a redirect URL on the aurh0 side as well, but I’ve set the exact same one. Is this okay too?

image1440×1554 60.4 KB

Jici · 2025-03-25T15:12:20.528Z

but the page you want to redirect the user to
Let’s say you have https://yourappname.bubblesapps.io/auth

You will add two pages:
https://yourappname.bubblesapps.io/auth (for live)
and https://yourappname.bubblesapps.io/version-test/auth (for dev)

in this page, you will detect the code in the url and use the continue action.

harumaki.ono · 2025-03-25T15:40:39.273Z

I want it to eventually redirect to the register page.

https://xxxxxxxxxx.com/version-test/register

I tried setting this URL on the Bubble side first, but the redirect destination remained the same.

I also tried changing the URL on the Auth0 side, but an error occurred on the Auth0 login screen.

image1392×1022 19.6 KB

image1768×1256 57.5 KB

Jici · 2025-03-25T16:58:51.270Z

Double check your url in authorize url, auth0 and api connector. All of them need to match

harumaki.ono · 2025-03-29T03:42:42.780Z

Sorry for the late reply.

Thank you.

Yes, both the Auth0 Callback URLs and the Bubble redirect_uri are set to
https://xxxxxxxxxx.com/version-test/register.

Excuse me, what was the authentication URL again?

Jici · 2025-03-29T03:44:56.150Z

The one that send the user to the auth page. This end by /authorize in your screenshot. This url.often have the redirect url too. This need to match what is allowed in oauth0

harumaki.ono · 2025-03-30T13:48:54.644Z

Since it is set to https://login.xxxxxxxxxx.com/authorize?response_type=code&client_id=eEDFUYV9NvuxTI24plpaPg1iCkTpKfwi&redirect_uri=https%3A%2F%2Fxxxxxx.com%2Fapi%2F1.1%2Foauth_redirect&scope=openid+profile+email

, it seems that https://xxxxxxxxxx.com/version-test/register is not included.

How can I do this?

Do I need to set it up somewhere in Auth0 or Xano?

I don’t know where to set it up.

Jici · 2025-03-30T15:18:15.548Z

If you are doing manual auth, you should have an action like open an external website? This is where you set that,in Bubble.

harumaki.ono · 2025-04-01T13:38:54.253Z

Thank you.

So some settings are required to authenticate manually.

Where is this external site?

What do I need to open to authenticate?

Also, is the flow complicated…?

I’m also considering allowing users to log in with their regular email address and password in some cases.

I apologize for the trouble, but I would appreciate any advice you could give me.

Jici · 2025-04-01T13:53:34.740Z

Did you set this yourself or do you use a plugin? The open an external website I’m talking about is an action in Bubble…

harumaki.ono · 2025-04-01T15:21:28.229Z

No, I don’t remember setting /authorize myself.
I looked it up and found the following in Xano’s initAPI. Does this seem related?

image2572×1412 97.6 KB

Xano

Auth0 | Xano

Discover how to integrate Auth0, a powerful authentication solution, into your Xano applications without writing code. Learn about Auth0's features like social logins, multi-factor authentication, and customizable login widgets. Follow the...

Jici · 2025-04-01T15:34:33.053Z

If I understand correctly, you are calling this init endpoint in Xano using API connector to get the authorize url? If this is the case, yes, look at the function that generate the authorize url.

harumaki.ono · 2025-04-02T14:34:33.288Z

Thank you!

After changing the default value of redirect_uri, I was successfully redirected to the register page after logging in to Auth0!

image2582×1222 86.9 KB

image2408×988 52.9 KB

However, the parameter is code=. Is this something I should not worry about?

I thought I should actually receive a token.

Also, until now, after logging in with Auth0, my email address would be registered in the Xano User table by clicking continue, but since I changed the above redirect_uri, it is no longer registered in the user table.