This plugin enables image annotation (adding markers with text interactively). Here are full features:
Adding a dynamic image as a background covering full width and full height of the visual element added on the page.
Zooming in/out on the background image
Dragging allowed if zoomed in (touch screen ready)
Reading coordinates X and Y (both px and percentage) on mouse movements over the Visual element (exposed states)
Reading coordinates data from Bubble App Type as markers on Visual Element āCanvasā.
Clicking a marker on Visual Element āCanvasā triggers an event āmarker_is_clickedā and reading Current Data Cell (Marker) from Bubble database.
Clicking a background a on Visual Element āCanvasā triggers an event ābackground_is_clickedā with the ability to initiate some bubble actions on that event.
@levon, Issue appears to have been with my iPad. It had an update available and after that was installed this problem went away.
I do have a question though, is there a way to stop that horrible flickering every time a pin is added, sometimes itās only a single flicker, often itās a double flicker.
Hello there @gnelson, thank you for your report, our team will analyse it, meanwhile are you able so share with a screenshots of the issues, or a small video?
Hi @levon and @ZeroqodeSupport,
I want to put the annotated images in a carousel with a repeating group and I have issues with the adjust height.
Some of the pictures are horizontal and others are vertical, and I donāt know how to make the vertical images to fit in the repeating group.
So far, when I click āyesā, the vertical pictures becomes too long compare to the horizontal ones, and when I click ānoā, the vertical pictures are cropped.
Could it be possible to have an adjust width and do you have a way to share with us how to deal with it ?
Thanks !
To help you better, could you please clarify here a bit by providing the screenshots with the result and screenshots of how it should work for you.
Currently, the plugin works so: whenever you upload an image, this image will be displayed as it is. It means, if it is vertical, then obviously it should be longer then horizontal one. Basically, the image display in the repeating group does not depend on the plugin itself.
Thank you for your quick reply.
Please find below two screenshots of two carousels. Each time, the first one is made with images, the second one with the plugin. For the image, on the run-mode-rendering option, I selected ārescaleā, there were also āstretchā and āadjust element heightā.
For the first example, the second carousel is made with the adjusted height (adjust=āyesā). The vertical picture is too long compared to the other ones.
For the second example, the second is made without the adjusted height (adjust=ānoā) but then the vertical picture is cropped and the vertical picture is not vertically aligned.
Could you please add a ārescale imageā feature to the plugin ? It would help to have the pictures vertically aligned too. Is there otherwise another way to solve this issue ?
Thank you in advance !
We have taken into consideration the possibility to add a rescale feature. We need to see how feasible it is to implement. Once we have relevant info with regards to this, weāll get in touch. Thanks for understanding
@levon@ZeroqodeSupport We got error messages on a configuration where nor the data, nor the bubble setup had changed (whereas we didnāt have these issues last week on friday). Can your team have a look at whatās going on here or let us know what we can do from our end? It seems like an issue with zeroqodeās cors service? (cors-anywhere-zq.herokuapp.com)
Thank you for your patience. The Dev team has resolved the issue on the Heroku service side, and everything should be up and running now. Please check and let us know if the issue is resolved and if the plugins are functioning as expected.
Wishing you a great Tuesday. Once again, we apologize for any inconvenience this may have caused.
Hello Guys, I have just treid to use your plugin within my app and received the following issue - I canāt figure out why, as I seems to have all of the fields and workflows properly assigned
The error seems to be related to the MarkerId field not being set correctly in your Issue data type or the dynamic setup in the img_annot_canvas element.
Please check the following:
Ensure the MarkerId is correctly assigned to each marker in your database.
Hey, thank you for the response - I still think I have setup everything correct - also the assigning of the MarkerId - see image attached - I might schedule a call with zeroqode to get this fixed.
From your screenshot, it seems the MarkerId is being assigned correctly.
Since the setup looks fine but the issue persists, I recommend comparing your plugin configuration with our examples here one more time:
I hope youāre doing well!
I just wanted to follow up on my previous message and see if you were able to resolve the issue after reviewing the plugin information sources Iāve attached.
If youāre still encountering any problems, feel free to reach out again, and we can dive deeper into the issue.
You can also request a Discovery Call if youād prefer more personalized assistance from our team.
Hello @ZeroqodeSupport , and thank you for reaching out again. I scheduled a Discovery Call for this week, which was replaced by you with an email correspondence with the support team. I did a screen recording session to explain the issue and got an answer that didnāt really help me to come further. I am quite sure, that the error is something easy on my side, but I donāt get any further with the recommendations I get as I always end up with the same recommendations. I could try to schedule a call again and hopefully donāt get redirected to mail again
Iāve responded to your inquiry regarding the Image Annotation Plugin via email.
After reviewing your Loom recording, Iāve provided some general suggestions that could help in resolving your issue.
To avoid any confusion, letās continue our conversation on one channel.
Thank you for understanding.
