Search Speed - Is this normal?

jonah.deleseleuc · 2025-03-08T14:43:17.104Z

I was wondering because in your forum post, there isn’t actually any questions being asked. Can you show how you’re searching for your data? Are you using a searchbox or a plugin?

In an app I’m working on right now there’s a searchbox that searches for airports. There’s roughly 80 000 airports in my database. It takes about 3 seconds for search results to appear.

thethinklab.au · 2025-03-08T23:06:35.870Z

Sorry - the post title had the question “Is this normal?”

That’s interesting, based on what you’re saying mine should be fast then. My setup is as follows - let me know if you have any recommendations:

Input box + Search&Autocorrect :

image904×294 17.1 KB

image706×1580 98.2 KB

RG set to Search&Aurocorrect’s matches:

image1298×1114 107 KB

thethinklab.au · 2025-03-08T23:36:15.568Z

Also weird, when I type in an input my app starts to become unresponsive and I get a Workload Usage Spiked error:

image1208×674 63.3 KB

image654×218 12.8 KB

It’s only 331 workload units (or is that a lot?), and I’m not actually cutting into into my monthly allocation yet…

Screenshot 2025-03-09 at 10.30.15 am1154×752 18.8 KB

image1466×1120 71.4 KB

This is so frustrating… You would think it’s a pretty standard use case to need to be able to search/query reference data. 15k records is not even a lot.

thethinklab.au · 2025-03-08T23:52:36.934Z

I’m back to using the QuickFine plug-in, which is still too slow (about 13 seconds, but at least the app doesn’t hang).

I want to know how when I’m in the Data Tab, I can type a string and it will return results within 200ms, but when I’m in the app it takes 13 seconds:

image1696×780 65.2 KB

msgiblin · 2025-03-09T04:51:21.282Z

Hi there,

What sort of search response times are you getting without using Fuzzy Search? The way Fuzzy Search works is it loads most of your database to iterate throgu and determine best matches; without Fuzzy and just using Bubble’s native search, the search happens in the backend, and only loads the matching results. Compare these 2 for timing.

Additionally, depending on the heaviness of the datatype (meaning how many fields, how large (charachters) those fields are, other datatypes and dependencies linked in these fields, etc) it may take longer.

Finally, I definitely recommend some type of pagination (i.e. only load 12 results per page, instead of the entire list).

Hope this points you in the right direction!

thethinklab.au · 2025-03-09T04:57:39.642Z

Thanks!

Search timings:

QuickSearch = ~13 Secs
Normal “Do A Search” filtered by Input’s Value = ~30 Secs
Search & Autocorrect = multiple minutes.

Here’s an example of one record:

image920×862 53 KB

Pagination isn’t really an option as it is a search and select… However, I am limiting the RG to 8 rows.

image996×1034 59.4 KB

msgiblin · 2025-03-09T05:01:51.051Z

Are these codes manually in your database or pulling from some msp or location based API /plugin?

thethinklab.au · 2025-03-09T05:14:11.861Z

Manually in DB…

image3090×718 134 KB

nocodeventure · 2025-03-09T10:29:23.870Z

Filtering occurs after records are fetched, which could cause browser crashes when processing around 15,000 records. Could you adjust your query to avoid client-side filtering?

Just add a search column to the table to combine whatever you want to search for in one single field

Search column example “AT 2607 Mawson $2500”

thethinklab.au · 2025-03-09T10:41:50.855Z

@nocodeventure

I have no filters, I am already searching on a field that combines postcode and suburb:

“Combined_suburb_postcode” e.g. value “9000 Sydney”

How do I move the search to the backend?

nocodeventure · 2025-03-09T10:50:01.771Z

You mentioned 1. Normal “Do A Search” filtered by Input’s Value = ~30 Secs

Can you do this without using filtered by?

thethinklab.au · 2025-03-09T11:02:19.708Z

Sorry this was with it directly in the do a search (combined_postcode_suburb = input’s value)

I wasn’t actually doing :filtered by

BrianHenderson · 2025-03-09T12:48:54.884Z

nocodeventure:

Just add a search column to the table to combine whatever you want to search for in one single field

This is exactly what I do. I use the normal Bubble searchbox element (not a plugin, I think that’s what OP’s problem is, I’ve never gotten plugin searchboxes to play nice with large datasets) and I have a field called “Search Combo” that’s a text value of all the different fields one might want to search for. For example, for a customer list, the Search Combo would be “Name, Phone, Company Name”.

ahmed.elkaffas · 2025-03-09T12:48:55.290Z

“Search & Autocorrect” won’t be suitable for 15,000 records. it should perform well if your records are up to 300~400 records, but more than that it won’t be performant.
Second, about the WU usage spike, that’s normal compared to your traditional usage over time, so if you are never using the application and once you made 331 WU then you will receive a notification of the spike just as a heads up.

In your case, you can use Bubble’s native search which might show filtered results in 1~2 seconds. If you’re seeking a better performance, then you can go for Algolia.

boston85719 · 2025-03-09T15:27:40.737Z

thethinklab.au:

(combined_postcode_suburb = input’s value)

change it to a setup where you are eliminating potentials for capitalization to be a problem…you would have to do this by creating a group, make it type text and datasource is the input elements value:lowercase (this is because your also need to make your database entries lowercase as well dynamically and we are not able to through dynamic expressions when comparing two sources values against each other to use the lowercase operator on the second value in the comparison expression). It also has to be done because Bubble contains comparative is case sensitive

… contains

This operation tests if the first entry contains the argument. The substring of text should match the sequence of characters of the first entry exactly, including case. This search respects the order of the words in the entry.

For example, searching for ‘cat’, ‘hat’, ‘cat in’, ‘cat in the’, ‘in the hat’, ‘at in’, or ‘cat in the hat’ would all return the phrase ‘the cat in the hat’.

However, searching for ‘cat the hat’, ‘cat hat’, or ‘Cat’ would not return ‘the cat in the hat’. This search is useful for returning exact matches for partial words, like searching ‘pepp’ and returning ‘peppers’.

manual.bubble.io

Operators and comparisons | Bubble Docs

Aggregating, manipulating and comparing data.

Make your search with built in constraint be combined_postcode_suburb:lowercase contains group inputs value lowercase.

Make your Repeating Group set to display at max maybe 10 items and likely for design reasons, it should be limited to 5 if you don’t want the ugly scrollbar and a clean ‘dropdown’ like selector made from groupfocus and repeating group.

One thing that might also need to be done based on the ordering of items in the value to compare as in the example from manual of cat in the hat…you may need to split your data field (since it is zip plus other values as single string)…or maybe structure the single string properly so it is 9000|suburb_name|other_details…which causes it to be treated as single word and then should remove the issue of contains operator being order driven.

Lastly, if you are still stuck on this in two weeks, reach out to me directly as I’d be interested to test my own tools against the issue.

DjackLowCode · 2025-03-09T18:47:00.317Z

Bubble can definitely handle queries on this number of records quickly in normal ‘Do a search’ on native elements, if not I’d raise a bug report.

Also, ‘Do a search:filtered’ and ‘Do a search:merged with Do a search’ should both happen server side unless using ‘advanced’ filters.

nocodeventure · 2025-03-09T23:16:02.905Z

The results are fetched from the database and then a filter is applied on the front end. Correct us if we’re mistaken.

adamhholmes · 2025-03-09T23:33:31.177Z

Do a search: filtered is (in most cases) no different from applying the constraints on the search - i.e. it’s done directly on the database query.

It seems to be a common misconception around here that using the :filtered operator applies filtering client-side - that’s not the case (at least, not usually).

It is the case if the filter operator uses an advanced filter.

DjackLowCode · 2025-03-09T23:35:06.327Z

@adamhholmes is correct. Check out the manual entry: Client-side and server-side processing | Bubble Docs

This can be useful when you want to allow for ‘ignore empty constraints’ on a search when you really want a few to not be ignored (e.g. =current user)

DjackLowCode · 2025-03-10T01:00:53.986Z

Hey @thethinklab.au , to give you a bit more confidence, here’s a similar dataset searching over 51,000 records with native search:

Screenshot 2025-03-10 135829726×379 16.1 KB

Search