🗃 New plugin - Multi-Uploader [BUBBLE AWS + UPLOADCARE + FILESTACK + AZURE] BIG Update: 11/06/2018

[ZeroqodeSupport]

Hello, @luc.simp
Thanks for the additional information.

Unfortunately, the plugin editor is not yet compatible with the New Responsive Engine. Bubble has confirmed that a new plugin editor engine is under development and has top priority. We will migrate all of our plugins to the New Responsive Engine as soon as we have a chance to have them work properly on it. Here is the announcement from Bubble: Plugin Editor & New Responsive Engine [beta]

For this reason, some issues after upgrading the Responsive Engine could appear.
Anyway, please allow us to investigate the plugin behavior within different types of groups and to revert with feedback ASAP.

In order to continue the work with the plugin, we can advise you to use a simple group ( instead of a row or column group\fixed container and etc.) before we will find a solution
Thanks for the understanding.

Best regards,
Zeroqode Support Team

[ZeroqodeSupport]

Hello, @Alex_Loonatik
Thanks for your feedback about our plugin.

@Alex_Loonatik

And I would vote for adding feature of adding initial content, to show which are already in a base, to have ability to delete them or add new.

Please note that you can retrieve a list of all files within your application by yourself. In order to create this, you need just to use the RG, which Data Source will use the uploaded files.

@Alex_Loonatik

Just one thing is that looks like Upload percentage in showing only 1 and 100. That’s confusing users looking at progress bar when still nothing happen till the end. Also tried it on a text to get the current state during uploading and see only 0 and 100. (Or I’m missing something?)

Can you please share the screenshots of your settings for displaying the percentage? It will help us to investigate this case internally and provide you a possible solution

Looking to hearing from you soon.
Best regards,
Zeroqode Support Team

[luc.simp]

using a simple group, the behaviour is the same as a fixed group. clear after upload only works on the first use. I have to force a page reset after all files are uploaded in order for it to be functional, which is unacceptable to me.

[Alex_Loonatik]

@ZeroqodeSupport

Please note that you can retrieve a list of all files within your application by yourself. In order to create this, you need just to use the RG, which Data Source will use the uploaded files.

Thats the way I’m doing it, right, but it would be great to keep all in pretty plugin’s interface.

@ZeroqodeSupport

Can you please share the screenshots of your settings for displaying the percentage? It will help us to investigate this case internally and provide you a possible solution

I guess, this implementation is very simple,… should be.
Uploader is under this floating group.

[ZeroqodeSupport]

Hello, @luc.simp

Please note that this feature works properly with the Old Responsive Engine.
As it was mentioned in our previous message, the plugin editor is not yet compatible with the New Responsive Engine.

From our side, we will investigate this behavior of the plugin and will try to fix the “Clear After Upload” action within the plugin on new engine

We are really sorry for this inconvenience and will try to do our best for improve your experience.

Best regards,
Zeroqode Support Team

[ZeroqodeSupport]

Hello, @Alex_Loonatik
Thanks for the provided screenshots.

@Alex_Loonatik

That’s the way I’m doing it, right, but it would be great to keep it all in pretty plugin’s interface.

We will analyze the possibility to add the mentioned feature for future plugin updates. We need to see how feasible it will be for us

@Alex_Loonatik

As we can see, you are trying to implement the percentage displaying through the “Progress Bar” plugin. Thus, please note that the way the degree of file loading is displayed depends on this plugin, but not on the “Multi-Uploader plugin”.

After checking the documentation for the “Progress Bar” plugin, we suppose that it will work perfectly for the static data, not dynamic.
You can use progress bars to show the completion status of a task. If you have a field of type “number” on an example task, then we can set this equal to our percentage.

Let’s say that if this task is more than 75% complete, we want to show the progress bar as green.

Progress Bar

We are sorry for your experience, however, the encountered issue is related not to our plugin performance, but to the “Progress Bar” settings.

Best regards,
Zeroqode Support Team

[roberto1]

Hi @ZeroqodeSupport
I’ve noticed you’ve released 2 plugin updates - 1st for the width and heigh, and and for new states.

I’ve updated but I still can’t get the width, height and size for each specific file.

• Do I have to do something different for it to work after updating it?
• Or you’re still working on this fix?

Thanks
Roberto.

[roberto1]

Updating @ZeroqodeSupport
I was able to get the correct width and size using “Uploader’s Last Image Width” and “Uploader’s Last Image Height”… Thank you for this! …but sometimes for the last uploaded file I get empty values (see image bellow)

I’m still not able to get the last file size. Is it possible for you to add a new state for this?
Something like “Uploader’s Last File Size” maybe?

Thanks,
Roberto

[ZeroqodeSupport]

Hello, @roberto1
Happy to hear that you are satisfied with the plugin update

Unfortunately, after the latest plugin update, we are not able to reproduce this behavior on our side.
Please make sure that you are using the same settings on your side:

In case the settings are the same, we highly recommend you remove plugin elements and re-install them from the beginning with the upgraded plugin version.

Hope it will help you.
Looking to hearing from you soon.

Best regards,
Zeroqode Support Team

[roberto1]

OK @ZeroqodeSupport I’ll check the usage, thanks.

And about the File Size I’ve mentioned?

Thanks
Roberto.

[roberto1]

Hi @ZeroqodeSupport
Using this setup I get the same results from before… A list os file sizes added to the 2nd file, 3d file, 4th file an on… I’m only able to retrieve single files width and height using " Uploader’s Last Image Width" and “Uploader’s Last Image Height”. Is that right?

Still waiting for your reply regarding the size of the single files. Is it possible to add a state Uploader’s Last File Size ?

Thanks
Roberto.

[Alex_Loonatik]

Thanks for so deep explanation.
So, what type of output data of plugin’s Upload Percent? Is it dynamic? Numbers 0-100?
I guess I can make my own status bar if I catch correct output data from plugin (or even write a plugin for it ).
Does it show current uploading percent of all files which are uploading in total?
Thank you again)

[ZeroqodeSupport]

Hello, @Alex_Loonatik

@Alex_Loonatik

So, what type of output date of plugin’s Upload Percent? Is it dynamic? Numbers 0-100?

Unfortunately, the output is not dynamic, moreover, it is pretty difficult to receive the percent of uploading for the single file.

This mechanism was created in a way, where you can receive the percentage of uploading for a few files. In case you upload 4 files, each successfully uploaded files you bring 25% percent of uploading.

However, we will analyze internally our possibilities to improve this feature. We need to see how feasible it will be.

We will revert with an update immediately after receiving it from our Developer Team.
Best regards,
Zeroqode Support Team

[ZeroqodeSupport]

Hello, @roberto1
We are sorry for this inconvenience.

Seems like data does not have time to be written due to the speed of the plugin, respectively, some data is simply lost.
Please allow us to check once again the created states and fix this behavior.

We will revert to you as soon as possible
Accept our sincere apologies for this trouble.

Best regards,
Zeroqode Support Team

[roberto1]

Ok I’ll wait for it. Thanks

[ZeroqodeSupport]

Hello, @roberto1
Sorry for our delayed reply

We made some changes within your DataBase, and now, the Height and Width of each file are saved correctly. However, the bug with the file size is still persisted and our Developer team is working on it.

We will notify you about the plugin update immediately after deploying it.

Looking to hearing from you soon.
Best regards,
Zeroqode Support Team

[randreas]

Hello @ZeroqodeSupport ,

First of all, I enjoy the plugin. Great work.

Unfortunately there are a few bugs that I’m not sure if they’ve been brought to your attention.

1. Uploader dynamic height: There is a bug where if a list of files is added to the uploader and the height of the uploader becomes taller, instead of pushing down any element underneath it, it hides them entirely as if its placed in front of them.

2. The uploader’s “Clear After Uploading” feature seems buggy and can only be used once per session. If I upload a list of files, it will clear. But if I do it a second time immediately after, the files will say they have been uploaded, but do not clear and the uploader height stays frozen. Also, this feature seems to work primary with the “Instant Upload” feature and sometimes appears to struggle with the “start from workflow” and “initialize from workflow” options.

Here is a link to a video where I try to demonstrate what I’m talking about.

Once again, I’m not sure if these have already been mentioned and are being worked on. Just thought you should know.

Thank you

[ZeroqodeSupport]

Hello, @randreas
Thanks for using our plugin.

@randreas

Uploader dynamic height: There is a bug where if a list of files is added to the uploader and the height of the uploader becomes taller, instead of pushing down any element underneath it, it hides them entirely as if its placed in front of them.

As we can find from your video, all uploaded files fit within the uploader element but add a scrollbar with which you can see all the elements. In case you need to display the files one after another, you need to change the form of the shape for this purpose.
In case we haven’t understood your idea correctly, please let us know

@randreas

The uploader’s “Clear After Uploading” feature seems buggy and can only be used once per session. If I upload a list of files, it will clear. But if I do it a second time immediately after, the files will say they have been uploaded, but do not clear and the uploader height stays frozen. Also, this feature seems to work primary with the “Instant Upload” feature and sometimes appears to struggle with the “start from workflow” and “initialize from workflow” options.

Can you please let us know if you are using a New responsive Engine for your application? Unfortunately, there are some issues with plugin behavior on the new responsive machine and our team is in process of investigating it.

Looking to hearing from you soon.
Best regards,
Zeroqode Support Team

[hacker]

Thanks, @ZeroqodeSupport,

@ZeroqodeSupport

By default, uploaded files are visible to anyone who has the link to the file. However, you for sure can add additional security for it in your DataBase by configuring the privacy rules.

Perfect.

@ZeroqodeSupport

In case you are speaking about the language of the Bubble Editor, please note that it could be changed in the “Settings Tab” of the Editor.
As for the front-end side of the application and text visible to your users, you can use any convenient for you language.

No, I mean this texts, can they be changed?

@ZeroqodeSupport

Can you please specify in more detail your requirements for customization?

1. Can I change the Uploading grey color and the Upload complete green color?
2. Can I add an uploading percentage?
3. Is there a condition for when Multi-Uploader is loading?

[ZeroqodeSupport]

Hello, @hacker
Thanks for your questions.

@hacker

No, I mean this texts, can they be changed?

You can change only this text within the plugin element:

As for “Upload Complete” and “Uploading”, this text cannot be changed.

1. Can I change the Uploading grey color and the Upload complete green color?
   The color of the progress is included in the plugin’s code by default. Thus, unfortunately, you can’t change the colors here.

@hacker

• Can I add an uploading percentage?

Currently, we are working on implementing this feature to the plugin. Now, you can receive only 0% or 100% in case of successful uploading of the file.

@hacker

1. Is there a condition for when Multi-Uploader is loading?

This option is not available in the current plugin version. Can you please describe the purpose of this action? It will help us to analyze its necessity.

Looking to hearing from you soon.
Best regards,
Zeroqode Support Team